“We test more than is required for our own benefit. We go beyond the standards because it lends better reliability to our design—products become more dependable in that regard.”
—Ron Barnet (Product Development Manager)
Interpower offers an extensive range of molded and rewirable North American plug configurations for power cords and cord sets. We design to your specifications, including value-added options like custom lengths, colors, labeling, and packaging. NEMA configurations and styles for plugs and sockets include: NEMA 1-15, NEMA 5-15, NEMA 5-20, NEMA 6-15, NEMA 6-20, and angled NEMA 5-15.
| NEMA Power Cords/Cord Sets |
NEMA Rewirable Plugs/Sockets |
|---|---|
 |
 |
Accessory Power Strips & Power Distribution Units
While the country-specific mains power plug connects to the mains power, the opposite end which terminates in an IEC 60320 connector is then plugged into the inlet of the Accessory Power Strip (APS) or the Power Distribution Unit (PDU). Now, using IEC jumper cords, connection to an array of equipment or devices is accomplished by plugging into the multiple outlets along the APS or PDU. Interpower Jumper cords have currents and voltages ranging from 2.5A-20A/125VAC-250VAC.
The APS and PDU is especially beneficial when there’s insufficient panel space to power up equipment, and where wall outlets are at a minimum. Even if your facility has an array of wall outlets and longer cords to reach them, those longer cords will cause more EMI (more conductor length means more interference), and you may wind up with a cat’s cradle of wires to trip over. Any power cord longer than 50 feet becomes derated—it potentially becomes a fire hazard as electrons push harder through the impedance to get to where they’re going.
| Accessory Power Strips | Power Distribution Units |
|---|---|
 |
 |
Interpower offers a newly designed connector lock in two different sizes. This patent-pending design does not require tools for use.
These connector locks can retain Interpower’s IEC 60320 C13/C14 and Sheet E/Sheet F combinations, along with C15/C16, and C17/C18 combinations. While built specifically for Interpower connectors, including angled models, the Interpower connector lock also secures a variety of other brands. They will transmit any pull force to the cabinet, eliminating any stress on the electrical components.
| Interpower Tool-Free Connector Locks |
|---|
 |
